2004 Polaris Touring Service Manual, Page 288Get this manual
BRAKESFINAL DRIVE 15Loosen set screws and seat drive shaft in transmission coupler stub shaftFor ease of assembly, make sure track has no pressure against drive shaft16Tighten nuts retaining angle drive housing to tunnelTorque to specification
Angle Drive Housing Retaining Nut Torque 1517 ftlbs(2124 Nm) 17Reinstall suspension inside track and align with tunnel mounting holes
18Install and hand tighten suspension bolts (A)19Install front carrier shaft assembly inside track and mount to tunnel with boltsHand tighten bolts20Install rear carrier shaft assemblyMake sure bolts are not cross threaded and hand tightenA