2004 Polaris Touring Service Manual, Page 228Get this manual
SUSPENSION Potentiometer Timing
Anytime that the ACE module is serviced, the potentiometer must be timed with the main clevis1Turn the large bevel gear clockwise until the screw shaft is fully seated in the clevis (fully SOFT position)Make sure that the clevis is oriented in the normal position (not tilted to one side or the other)2Assemble the motor to the housing at this time to keep the gear and clevis from movingIf the motor is already installed, jog the motor with 12 volts until it is in the fully SOFT position3Turn the potentiometer until the resistance between the WHITE and BLACK wires is at 107 (+5 ohms)4Install the small plastic gear and allow time for thWire Harnesse Loctite 480 to dry before operating