2004 Polaris Touring Service Manual, Page 206Get this manual
BODYSTEERING 4After the decal is removed, apply 3M citrus based cleaner to
the decal area to remove the adhesiveBe sure to follow the instructions and the precautions on the container, and use rubber gloves and safety glassesSpray the cleaner on the adhesive and let set for 1520 secondsUsing squeegee, wipe the adhesive from the hood and deposit it in paper shop towelYou may have to repeat this process several times to remove all of the adhesive from the hoodUse care not to get the cleaner on any other decalsusing the squeegee, remove any left over residue with clean, non-abrasive shop towel or cheese cloth that is wet with the 3M cleanerto protect other decals
5When the bulk of the adhesive is removed from the hood by
6Carefully remove any masking tape that you may have used 7Once all of the adhesive is removed from the decal area, follow with cleaning solution of 99 water to mild
dishwashing detergentUse non-abrasive cloth with the solution to remove dirt, grease, cleaning solvent, and finger printsAlways clean the surface where the decal will be applied