2004 Polaris Touring Service Manual, Page 201Get this manual
BODYSTEERING Seat Cover Replacement
1Remove seat assembly2Remove seat and seat covering to be replacedCarefully remove staples by loosening with small flat blade screwdriverPull each staple straight out with pliers
Seat Cover
3On some models, it will be necessary to drill out the rivets holding the strap bucklesReach inside the tool box and rotate the "D" ring buckle which secures the center hold down strapPush the "D" ring through the slot in the tool box and carefully pull it through the foam cushionReassembly Note: For ease of assembly, hook wire to the center strapThis will allow you to pull the center strap back through the foam and into the storage box4Place the seat foam on the seat base assembly as shown in Ill15Drape the seat cover over the seat foam6Insert and pull the two seat bucket hold down straps, attached to the seat cover, through the two holes in the seat foam and the routed-out holes located in the storage box area on the plastic seat baseHINT: stiff wire attached to the bar slide on the hold down strap will aid in this process