2004 Polaris Touring Service Manual, Page 200Get this manual
BODYSTEERING Handlebar Torque and Sequence
1Remove handlebar cover2Using 716 (11 mm) wrench, loosen four nuts on bottom of adjuster blockNOTE: Turn handlebar to left or right for access to back nuts3Adjust handlebar to the desired heightBe sure that handlebars, brake lever and throttle lever operate smoothly and do not hit the fuel tank, windshield or any other part of the machine when turned fully to the left or rightIMPORTANT: When adjusting the handlebar, be sure the serrations in handlebar and adjuster block match before torquing4Torque the handlebar adjuster block bolts to specification following sequence shownThe gap should be equal at front and rear3 Socket Screws 1