2004 Polaris Touring Service Manual, Page 179Get this manual
CLUTCHING Clutch Alignment Adjustment
12345Loosen all engine mounting boltsAdjust engine torque stop until clutches are in proper alignmentTighten engine mounts securelyRecheck both clutch offset and alignmentVerify proper torque stop adjustment
Torque Stop Adjustment NOTE: There are two types of torque stops currently usedRefer to the illustrations below for adjustment of each
type1After aligning clutches, adjust torque stop by loosening lock nut and rotating stop to proper clearance as shownHold torque stop and tighten jam nut to 15-17 ftlbs(21-24 Nm)