2004 Polaris Touring Service Manual, Page 177Get this manual
CLUTCHING P-85 Belt Deflection Adjustment
Belt deflection can be adjusted without removing the clutch from the jackshaft1Pull belt into driven clutch to slightly open sheaves2Loosen three bolts on adjustment cam3Turn cam counterclockwise to reduce distance between sheavesDo not rotate past #1 position4Torque bolts to specification
Adjustment Cam
Team Clutch Belt Deflection Adjustment
1To adjust the sheaves, loosen the 716" jam nut on the belt width adjuster2Using 18" Allen wrench, adjust the threaded set screw as neededNOTE: Turn the set screw in (clockwise) to increase the distance between the sheaves and out (counter clockwise) to decrease the distance3Tighten the jam nut after the belt adjustment has been made