2004 Polaris Touring Service Manual, Page 68Get this manual
ENGINE Oil Pump Adjustment Procedure
1Synchronize carburetors as outlined in chapter fourSet engine idle speed as outlined in each model's specification chart listed in chapter one
2Adjust throttle cable freeplay to .010.030 (.25.8mm)
.010-.030 (.25-.8 mm)
Throttle freeplay 3Verify that carburetor slides leave their respective resting positions upon opening within .01 to .03 of throttle cable movement, not throttle lever movementSee figure 2
4Verify that the oil pump alignment lines are aligned at the point where the carburetor slides begin to raise from their resting positionsNote: Marks may not line up without throttle engagementSee figures and 45Torque cable locknuts to 1020 in.lbs
NOTE: Use mirror when aligning the oil pump marks whenever the oil pump is difficult to viewMikuni Flatslide Carburetors 6Verify that carburetor slides are within 116 of each other when passing the top of the carburetor throatSee figure 2