2004 Polaris Touring Service Manual, Page 51Get this manual
MAINTENANCE Mechanical Reverse
Mechanical Reverse Adjustment
Due to break-in or replacement of components, the reverse shift mechanism may require adjustment1Loosen jam nuts on linkage rod (A)2Turn the threaded linkage rod (B) to lengthen or shorten the throw until reverse engages fully3Tighten jam nuts and re-check adjustmentCotter Pin Shift Lever Actuator Shift Lever Clevis Pin
Cleaning And Preservation Of Hood, Chassis And Trim
Proper storage starts by cleaning, washing and waxing the hood, chassis, upholstery and plastic partsClean and touch up with paint any rusted or bare metal surfacesEnsure that all corrosive salt and acids are removed from surfaces before beginning preservation with waxes and rust inhibitors (grease, oil, or paint)If the machine is equipped with battery, disconnect the battery cables and clean the cables and battery postsFill battery to proper level with distilled water and charge to full capacityRemove and store the battery in cool dry placeThe machine should be stored in dry garage or shed out of the sunlight and covered with fabric snowmobile coverDo not use plastic to cover the machine; moisture will be trapped inside causing rust and corrosion problems