2004 Polaris Pro X Factory Service Manual, Page 70Get this manual
MAINTENANCE Removing Halogen BulbsLow Beam NOTE: Do not touch halogen bulb with bare fingersOil from
skin leaves residue, causing hot spot which will shorten the life of the lamp1Pinch ends of spring together and lift until it releases from spring retainer2Lift spring carefully around wire harness and flip to outside of housing3With wire harness attached to bulb, withdraw bulb from housing4Grasp bulb by metal base and carefully separate bulb from harnessWire Harness
Taillight Bulb Replacement
1Remove the Phillips screws from taillight lens2Working from the center, carefully pry lens away from housing and remove3Pull bulb straight out from socket and insert new bulb4Reinstall lens
Handlebar Adjustment
1Remove the handlebar cover2Using 716 (11 mm) wrench, loosen four nuts on bottom of adjuster blockSocket Screws 1