2003 Polaris Deep Snow Snowmobiles Service Manual, Page 48Get this manual
MAINTENANCE Taillight Bulb Replacement
1Remove (5) Phillips screws from taillight lens2Working from front to back, carefully pry lens away from housing and remove3Pull bulb straight out from socket and insert new bulb4Reinstall lensLens
Handlebar Adjustment
1Remove handlebar cover2Using 716 (11 mm) wrench, loosen four nuts on bottom of adjuster blockNOTE: Turn handlebar to left or right for access to back nuts3Adjust handlebar to the desired heightBe sure that handlebars, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right4Torque the handlebar adjuster block bolts to specificationMaintain an equal gap at front and rear of block5Replace handlebar coverBulbs
Socket Screws 1
Handlebar Adjuster Block Bolt Torque 1113 ftlbs(1518 Nm)