2003 Polaris 3 PRO X Factory Service Manual, Page 248Get this manual
REAR SUSPENSIONTRACKTRACTION Walker Evans Racing Shocks Rear Shock Maintenance (Cont
21Fill the shock body and the reservoir 12 full of Walker Evans 5w shock oil (PN 2874522)22Apply thin film of oil to the IFP O-ring and floating wear band23Compress the wear band as you install the IFP and Allow as much air as possible to escape as you install the piston24Screw the IFP tool onto the floating pistonIFP TOOL PN PS45908
25Hold the reservoir as low as possible and slowly cycle the IFP up and down to purge air out through the main shock cylinderBe sure to bottom out the piston in the reservoir bodyAllow time for bubbles to dissipate and repeat the process until all air is removed26Set the IFP to the proper depthRefer to illustrations for the shock you are working on27Fill the shock body to level just below the threads (A)