2003 Polaris 3 PRO X Factory Service Manual, Page 238Get this manual
REAR SUSPENSIONTRACKTRACTION Shock Valving Arrangement
Shown below is an example of how valving stacks are arrangedThe following diagrams will have the compression and rebound stacks listed as if the shock rod is in vise and the nut end is facing upward
Parts in box are an example of standard valving Note direction of valve piston before disassemblyThe side with the greater number of slots should face the IFP (nut end of the shaft)
Typical Valving
.800 .010 .900 .010 1.00 .010 1.100 .010
Piston Orientation Side with greaterof slots must face nut end (Toward NutIFP)