2003 Polaris 3 PRO X Factory Service Manual, Page 152Get this manual
CLUTCHING Spider Roller Removal
1Remove spider buttons using button removal toolRemove shims (if any are installed) and note locationNOTE:The drive clutch spider buttons for the 800 twin cylinder domestic engines are less exposed than typicalIt will not be possible to remove the buttons with the traditional spider button removal toolS Using 516" drill bit, drill hole through the center of the button until the drill bit hits the pin (approximately 316" (5 mm)S Place Clutch Pin Tool PN 2870910 in the 516" hole you drilledS Using an arbor press, press the pin and opposite button outPlace 516" bolt or rod in the opposite hole to press the button out that you drilled throughUse button PN 5434188 as your replacement buttons