2003 Polaris 3 PRO X Factory Service Manual, Page 53Get this manual
ENGINE NOTE: Inspect all parts for wear or damage during disassemblyReplace all seals, O-rings, and gaskets with Genuine Polaris parts during assemblyDisassemblyLiberty 440600 Liquid 1Remove carburetor mount adaptors, reed cages, stuffers, and oil pumpNote position of stator wire guideMeasure air gap between fiber reed and reed block as shownThe air gap should not exceed .015 (.4 mm)If clearance is excessive DO NOT attempt to reverse the reeds to reduce the air gapAlways replace them if damagedCheck each fiber reed for white stress marks or missing materialReplace if necessaryReed Pedal Clearance .015 (.38 mm) maxExaggerated for illustration