2000 Polaris Indy 500 / 600 snowmobile service manual, Page 302Get this manual
SUSPENSION Fox Shock Maintenance Assembly, Cont20To check for leaks, submerge the shock in water and look for bubbles or oil seepage around the bearing and body caps21When reinstalling shocks on the machine, torque only to required specificationsIf the shock is over tightened it will not pivot, possibly resulting in damage to shaft and seals22When installing IFS shocks, tighten top mount firstPivot shock body into lower mount and determine if spacer washers are necessary to prevent twist or side loading of shockSuspension assemblies should always be moved through entire travel without springs to verify free movement and proper alignment of all components