2000 Polaris Indy 500 / 600 snowmobile service manual, Page 204Get this manual
CLUTCHES Clutch Bushings P-85 P-85 Driven Clutch Movable Sheave Large Bushing Installation
NOTE: The P-85 driven moveable has split bushingThe bushing is held in place after installation by screws11Insert bushing (PN 3569803) into clutch and tap lightly with soft face hammer
Ill4 12Install adapter number two (Item 10) onto pullerSee Ill513Slide clutch sheave onto puller with back side away from vise14Turn puller barrel until rod extends past back side of sheave15Insert large installation tool for DU bushing (Item 4) onto rod16Install nut onto puller rod and hand tightenTurn puller barrel to increase tension as needed17Turn clutch sheave counterclockwise until bushing is seated18Remove nut from puller rod and set aside19Remove installation tool and slide clutch sheave from pullerNOTE: The screws hold the bushing in placeIll5 Adapter Number Two