2000 Polaris Indy 500 / 600 snowmobile service manual, Page 200Get this manual
CLUTCHES Clutch Bushing Replacement P-85 P-85 Drive Clutch Cover Bushing Removal Cont3On models equipped with snap ring, remove round wire snap ring from inside of clutch cover using small scribe or pick and set aside4Install main adapter (Item 8) on puller5From outside of clutch cover, insert removal tool (Item 3) into cover bushing6With inside of cover toward vise, slide cover onto puller7Install nut onto puller rod and hand tightenTurn puller barrel to increase tension as needed8Turn clutch cover counterclockwise on puller rod until bushing is removed9Remove nut from puller rod and set aside10Remove bushing and bushing removal tool from pullerDiscard bushing
P-85 Drive Clutch Cover Bushing Installation