2000 Polaris Indy 500 / 600 snowmobile service manual, Page 99Get this manual
ENGINES 500 Domestic Case Reed Twin Assembly, Cont32Install water pump cover with new gasket
Water Pump Cover Bolt Torque: Ft lbs (12.5 Nm)
33Install new exhaust manifold gaskets and manifold
Exhaust Manifold Bolt Torque: 16 Ft lbs (22 Nm) 34Assemble V.E.SvalveRefer to V.E.Sprocedures on pages 3.39-3.4235Install reed valves, stuffers, and carburetor adaptorsPlace stator wire guide on Mag side carburetor adaptor bolt36Install stator assembly, aligning timing marks or marks made upon disassemblySeal stator wires with high temperature silicone sealantInstall and tighten stator screws to specification37Measure trigger (pulse) coil gap and compare to specificationStator Screw Torque 60 inlbs(7 Nm) Seal Stator Wires Apply Loctitet 262 to Taper