2007 Arctic Cat Four-Stroke Factory Service Manual, Page 499Get this manual
0742-145
! NOTE: It is advisable to install the rear arm springs onto the adjuster blocks after the skid frame has been installed
6Grease the idler arm and rear arm grease fittings with low-temperature grease7Install the rear upper idler wheels, rear springs, and offset pivot idler (see Rear Upper Idler WheelsRear Springs in this sub-section)MS026
5Place the upper shock eyelet with bushings between the idler arm brackets making sure the spacer is properly positioned between the bracketsSecure with cap screw and lock nutTighten securely
Front ArmFront Arm BracketsFront Shock Absorber
! NOTE: The skid frame must be removed for this procedure (see Removing Skid Frame in this subsection), and the rear springs must be removed from the adjusting cams