2007 Arctic Cat Four-Stroke Factory Service Manual, Page 494Get this manual
! CAUTION When driving the idler wheel onto the idler arm, use tool to contact the inside race of the bearing or damage to the wheel or bearing may occur
! NOTE: When tightening the pivot idler arm lock nuts, tighten the lower lock nut first or binding may occur
MS019B MS072A
4Install the idler spacer collar onto the idler arm
Rear Axle and Idler Wheels
! NOTE: The skid frame must be removed for this procedure (see Removing Skid Frame in this subsection)
DISASSEMBLING
1Remove the cap screw and large flat washer securing the outer rear idler wheelRemove the outer idler wheel from the shaftMS064