2007 Arctic Cat Four-Stroke Factory Service Manual, Page 486Get this manual
1To avoid having the adjuster bushings binding during loosening of the track, remove the rear idler wheel caps and loosen the cap screws on the rear axle Wear Strips
REMOVING
! NOTE: The skid frame does not have to be removed for this procedure; however, if wear strip binding or slide rail damage has occured, the skid frame should be removed for this procedure (see Removing Skid Frame in this sub-section)
1Remove the machine screw and lock nut securing the wear strip to the front of the slide rail
2Loosen the jam nuts and two track-tension adjusting bolts