2007 Arctic Cat Four-Stroke Factory Service Manual, Page 482Get this manual
6Install the rear inner idler wheel mounting block in the appropriate holes as noted during disassembly and secure with cap screw and lock nutTighten to specifications 8Install the cap screw and lock nut (if removed) securing the front inner idler wheel assembly to the slide railsTighten to specifications
MS053A MS059
! NOTE: To obtain proper alignment for the idler wheel cap screw, place the cap screw in the top hole through the rail and mounting block prior to tightening
! NOTE: At this point, tighten the cap screws and (from step 4) to specifications