2007 Arctic Cat Four-Stroke Factory Service Manual, Page 481Get this manual
2Secure the track adjuster bracket with the cap screws and lock nutsTighten only until snug
! NOTE: Care must be taken that the adjuster bushing slot is aligned properly with the adjuster bolt! NOTE: It is advisable to tighten the rear idler wheel axle only until snug until the skid frame has been installed and track tension has been adjusted; then the axle assembly must be tightened to specifications
4Install the rear arm limiter cap screw (A) in the appropriate hole (as noted during disassembly); then install the rear arm in the appropriate hole as noted during disassemblyInstall cap screw (B) and lock nutTighten only until snugMS057A