2007 Arctic Cat Four-Stroke Factory Service Manual, Page 480Get this manual
INSPECTING ! NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Inspect the slide rail for cracks (A), elongated holes (B), or unusual bends
! NOTE: The adjusting bolt may have to be loosened to remove the adjuster bushing! NOTE: At this point, the slide rail should be free of the skid frame components and can be removed
14Remove the cap screws and lock nuts securing the track adjuster bracket
2Inspect the wear strip for wearThe wear strip must be 10.7 mm (0.42 in thick or thickerIf the wear strip measurement is less than specified, replacement of both wear strips is necessary