2007 Arctic Cat Four-Stroke Factory Service Manual, Page 475Get this manual

2007 Arctic Cat Four-Stroke Factory Service Manual, Page 475

Rear Shock Absorber and Shock Links ! NOTE: The skid frame must be removed for this procedure (see Removing Skid Frame in this subsection)
DISASSEMBLING

1Using the Rear Suspension Spring Tool (pn 0144-311), remove the spring from the adjusting cam

4Mark the hole that the upper shock links are mounted in for assembly purposes; then remove the cap screw and lock nut securing the shock links to the upper arm bracketAccount for all mounting hardware
AG624DA

! WARNING
Care must be taken when removing the spring from the adjusting cam or damage or injury could resultMS025

Back to 2007 Arctic Cat Four-Stroke Factory Service Manual