2007 Arctic Cat Four-Stroke Factory Service Manual, Page 474Get this manual
4Slide the front inner idler wheel assembly into position on the slide rail; then align the assembly with the proper hole (as noted in removing)Install the cap screw, flat washer, and lock nut; then tighten to specifications
! NOTE: Do not over-tighten the shock absorber cap screw as the shock eyelet must be free to pivot
7Place the rear shock absorber and shock links into position on the pivot; then install the axles, cap screw, and lock nutTighten securely
5Position the front arm with spacers, an axle tube, and serrated axles to the mounting bracketsSecure with the cap screw and lock nutTighten to specifications