2007 Arctic Cat Four-Stroke Factory Service Manual, Page 458Get this manual

2007 Arctic Cat Four-Stroke Factory Service Manual, Page 458

3Clean both the slide rail area and the end capUsing compressed air, clean the areas of dirt and gravel 2Inspect the rivet holes in the slide rail for damage or elongationINSTALLING

! WARNING
Always wear an approved pair of safety glasses when using compressed air
1Place the pads and retaining brackets into position on the slide rail2Secure the pads with rivets
4Inspect the cap screw for cracked, stretched, or damaged threadsUse new lock nut when assemblingINSTALLING

1Position the end cap on the slide rail; then align the hole in the end cap with the hole in the slide rail2Secure with cap screw, washers, and lock nutTighten to specifications
Shock Pads
! NOTE: The skid frame does not have to be removed for this procedure

Back to 2007 Arctic Cat Four-Stroke Factory Service Manual