2007 Arctic Cat Four-Stroke Factory Service Manual, Page 457Get this manual
3Using straightedge, inspect the slide rail for any unusual bendsWith the slide rail removed, place the straightedge along the bottom surface of the slide railIf the rail is found to be bent, it must be replaced MS016A
2Using hammer, tap the end cap off the railCLEANING AND INSPECTING
INSTALLING
! NOTE: Apply light coat of grease to the slide rail surface to aid in installing new wear stripIf there are any sharp edges on the lower portion of the rail, use file to remove them
! NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary