2007 Arctic Cat Four-Stroke Factory Service Manual, Page 455Get this manual
3When the track stops rotating, check the relationship of the rear idler wheels and the inner track drive lugsIf the distance from the idler wheels to the inner drive lugs is the same on both sides, no adjustment is necessary ! NOTE: Critical torque specifications are located on page 140 of this section! NOTE: Some illustrations and photographs used in this sub-section are used for clarity purposes only and are not designed to depict actual conditions
! CAUTION
In this section, it will be necessary to tip the 660 cc snowmobile on its side for accessing some components; however, if 660 cc model must be tipped in excess of 70 angle for servicing purposes, use suitable clamping device to clamp off the oil hose next to the valve cover inlet to prevent oil from seeping into the upper engine through the air-intake systemSevere engine damage could result if the engine is run with oil in the upper engineCare must be taken to remove the clamping device after servicing
725-070A