2007 Arctic Cat Four-Stroke Factory Service Manual, Page 445Get this manual
! NOTE: At this point if the front arm shock absorber was removed from the front arm, install it and tighten securely 14On the Touring models, install the rear arm stop with cap screw (coated with blue Loctite #243)Tighten to specifications
11Secure the outer idler wheel mounting block with the cap screw and lock nutTighten to specifications! NOTE: When tightening the mounting block lock nut, it is recommended that idler wheel cap screw (A) be installed to maintain proper alignment
15Tighten the cap screw and lock nut securing the rear arm assembly (from step 4) to specifications