2007 Arctic Cat Four-Stroke Factory Service Manual, Page 439Get this manual
! NOTE: At this point on the Bearcat WT models, remove the forward inner idler wheel and mounting block from the slide rail 9Remove the cap screw and flat washer securing the spring slide and overload spring to the railAccount for spacer, the slide block, overload spring, retainer clips, bushing, one small washer, and two large washers
! NOTE: If not already done, remove the short spring leg from the adjusting camAlso, it is recommended that the cap screw be removed from the front shock absorber to the front arm to aid in slide rail installing
7Remove the cap screw and lock washer securing the front inner idler wheel assembly to the slide rail