2007 Arctic Cat Four-Stroke Factory Service Manual, Page 434Get this manual
DISASSEMBLING ! NOTE: When removing center components from the skid frame, it is advisable to loosen all cap screwslock nuts from one side of the slide rail to make removing easier
1Disengage the shock absorber at the upper eyelet and remove the shock absorberAccount for sleeve, cap screw, lock nut, and bushings
! NOTE: Do not over-tighten the shock absorber cap screw as the shock eyelet must be free to pivot
6Secure the limiter straps to the rail supports with cap screws, washers, and lock nutsTighten to specificationsMS089A
! NOTE: For ease of disassembling, it is advisable at this point to place block of wood between the idler arm and the overload springs