2007 Arctic Cat Four-Stroke Factory Service Manual, Page 414Get this manual
1Align the wear strip with the openings (windows) in the track and from the back, start the wear strip onto the rail; then using block of wood and hammer, drive the wear strip forward into position 739-884A
CLEANING AND INSPECTING
! NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
739-884A
1Clean the slide rail using parts-cleaning solvent and compressed air
2Secure with machine screw and lock nutTighten to specifications
! WARNING
Always wear an approved pair of safety glasses when using compressed air
End Caps
! NOTE: The skid frame does not have to be removed for this procedure
2Inspect the slide rail for cracksIf any cracks are found, replace the slide rail3Using straightedge, inspect the slide rail for any unusual bendsWith the slide rail removed, place the straightedge along the bottom surface of the slide railIf the rail is found to be bent, it must be replaced