2007 Arctic Cat Four-Stroke Factory Service Manual, Page 412Get this manual
! NOTE: Allow the track to coast to stopDO NOT apply the brake because it could produce an inaccurate alignment condition 3After proper track alignment is obtained, tighten both the adjusting bolt jam nut and the idler wheel cap screw securely
4When the track stops rotating, check the relationship of the rear idler wheels and the inner track drive lugsIf the distance from the rear idler wheels to the inner track drive lugs is the same on both sides, no adjustment is necessary
! WARNING
If jam nut is not tightened properly, the adjusting bolt could loosen causing the track to become dangerously loose
4Field test the track under actual conditions; then make additional adjustments as necessary
Repair Procedure TrackRear Suspension
This TrackRear Suspension sub-section (Repair Procedure 2) has been organized so each procedure can be completed individually and efficientlyEach sub-section has (as necessary) Removing, Disassembling, Cleaning and Inspecting, Assembling, and Installing proceduresSome components may vary from model to modelThe technician should use discretion and sound judgment when removing and installing components! NOTE: Some illustrations and photographs used in this sub-section are used for clarity purposes only and are not designed to depict actual conditions! NOTE: Critical torque specifications are located on page 140 of this section