2007 Arctic Cat Four-Stroke Factory Service Manual, Page 387Get this manual
738-230B
738-230C
! NOTE: When setting the block, the chosen groove position must be directed toward the idler arm
3Place 4-inblock of wood under the rear of the suspension just in front of the rear idler wheelsThis will assist in collapsing the suspension4Collapse the rear suspension until the rear arm is firmly against the coupler blocksThis will align the two blocks squarely with the armWhile in this position, tighten the two cap screws securing the blocks
SUSPENSION MOUNTING LOCATION CHART
! NOTE: The Rear Arm Mounting Position refers to where the rear arm mounts into the tunnelThe Rear Arm To Rail Position refers to where the lower portion of the rear arm mounts between the slide railsMODEL
T660 Turbo Trail Panther 660 Trail
TRACK LENGTHLUG HEIGHT
15" 121" 1.25" 15" 121" 0.85"
SKID FRAME
FastrackStamped Rail FastrackStamped Rail