2007 Arctic Cat Four-Stroke Factory Service Manual, Page 352Get this manual
! NOTE: For installing the drive belt on models with the ACT Roller Driven Pulley, see Removing Installing Drive Belt (ACT Roller Driven Pulley) in this section (Bearcat Wide Track Panther 660T660)WARNING
Use only Arctic Cat approved Hi-Temp Brake Fluid (pn 0638-315)Never substitute or mix different types or grades of brake fluidBrake loss may occurBrake loss can result in severe injury or even death
Brake System
! NOTE: The locking ring must be installed with the beveled tabs directed outward toward the jam nut
CHECKING BRAKE LEVER TRAVEL
1Compress the brake lever fully! NOTE: Do not pump the brake lever as it will produce an inaccurate reading
2Measure the distance between the brake lever and the handlebarThe distance must be greater than 2.54 cm (1 inZJ262