2007 Arctic Cat Four-Stroke Factory Service Manual, Page 335Get this manual

ADJUSTING REVERSE LINKAGE
1Start the engine; then test the shifting characteristics of the reverse transmission2If adjustment of the reverse gear is necessary, stop the engine and remove the chain case inspection plug located behind the oil level stick; then insert the Reverse Gear Adjustment Gauge (pn 0644-244) completely into the inspection hole
Drive TrainBrake Disc
(Jaguar Z1)
Removing Gear Case 8-41 Removing Track Driveshaft 8-42 Installing Track Driveshaft 8-44 Disassembling Gear Case8-46 Cleaning and Inspecting Gear Case 8-49 Removing Drive Sprockets 8-49 Installing Drive Sprockets 8-50 Assembling Gear Case 8-52 Installing Gear Case 8-55

REMOVING GEAR CASE
! NOTE: The gear case drive fluid does not have to be drained for this procedure
1Remove the access panels from both sides of the snowmobile! NOTE: At this point, engage the brake lever lock0731-734

• ATV
• Jet Ski
• Outboard Motors
• Personal Watercraft
• Snowmobiles
• Stern Drives