2007 Arctic Cat Four-Stroke Factory Service Manual, Page 307Get this manual
3On the 1100 cc Z1 using Drive Clutch Bolt Tool (pn 0644-281), remove the 12-mm Allen-head cap screw and washer securing the drive clutch to the crankshaft 5Remove the drive clutch from the engine compartmentAccount for any spacersDisassembling
! NOTE: Note the timing marks on the cover, spider, and movable sheaveThese must be aligned when assembling the drive clutch for balance purposes
1Loosen the machine screws securing the coverRemove every other cap screw and lock washer from the cover; then while firmly holding the cover, remove the three remaining screws and lock washers equally