2007 Arctic Cat Four-Stroke Factory Service Manual, Page 279Get this manual
! CAUTION
Prior to continuing the installing procedure, make sure the gasline hose is properly and securely "snapped" onto the gas tank
5Install the screws (D) and the body screws securing the knee pads to the gas tank and the steering support; then secure the rear side panels (spars) with the three torx-head cap screws (C) for each side6Install the handlebar close-off panel; then secure the panel with the two torx-head cap screws (B)Position the console assembly on the headlight support bracket; then connect the main hood harness7Install the console to the steering support with the two torx-head cap screws (A)Tighten securely8Install the hood; then close the side access panels9Install the seat; then install the machine screw (E) (threads coated with blue Loctite #243) to the right side of the seat support