2007 Arctic Cat Four-Stroke Factory Service Manual, Page 267Get this manual
5At this time to install the right-side steeringsuspension components, first install the shock with sleeve to the shock mounting frame with cap screw and lock nut corresponding to (G)leftside6At this time, position the drag link and steering arms into the suspension mounting bracket; then with axles in place, install the right-side upper A-arms and lower A-arm with cap screws and lock nuts corresponding to (E)left-side! NOTE: When installing the A-arms, make sure the axle shoulders are properly positioned Step Step Step Step Step 10 Step 11 Step 12
Lock Nut (G)RH Lock Nut (E)RH Lock Nut (H)RH Lock Nut (G)LH Lock Nuts (E)LH Lock Nut (H)LH Lock Nut (B)
6.2 kg-m (45 ft-lb) 6.2 kg-m (45 ft-lb) 2.8 kg-m (20 ft-lb) 6.2 kg-m (45 ft-lb) 6.2 kg-m (45 ft-lb) 2.8 kg-m (20 ft-lb) 5.5 kg-m (40 ft-lb)