2007 Arctic Cat Four-Stroke Factory Service Manual, Page 265Get this manual
12Remove the lock nut from the cap screw (G) securing the left-side shock absorber to the shock mounting frame; then remove the cap screw and remove the left-side steeringsuspension components13Remove the cap screws and lock nuts (H) securing the two steering arms to the suspension mounting bracket14Remove the lock nuts and cap screws (I) securing the two shock absorber mounting frames to the suspension mounting bracket; then remove the four lock nuts and cap screws (J) securing the shock mounting frames to the front upper frame! NOTE: Remove the lock nut from the cap screw corresponding to (G)left-side securing the rightside shock absorber to the shock mounting frame; then remove the cap screw and slide the right-side steeringsuspension assembly out of the suspension mounting bracketAccount for the axles and the shock absorber sleeve! NOTE: For installing purposes, note the position of the longer mm cap screws securing the shock mounting frame to the suspension mounting bracket ZJ169