2007 Arctic Cat Four-Stroke Factory Service Manual, Page 263Get this manual
0742-219
2Slide the sway bar out of the chassisINSPECTING
! NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
3Remove the two body screws and lock nuts securing the bottom of the bumper assembly to the suspension mounting bracket
1Inspect the sway bar for any signs of twisting, fatigue, or wear2Inspect the sway bar links for cracks or damageINSTALLING
1Place the sway bar into position in the chassis; then install the sway bar links to each end of the sway bar and position the links onto the pins of the A-arms2With the sway bar properly positioned in the chassis, install the sway bar mounting brackets and secure the brackets with the lock nuts and tighten to specifications