2007 Arctic Cat Four-Stroke Factory Service Manual, Page 262Get this manual
2Adjust the retainer nut (spring adjuster) until the specified amount of threads are exposed between the spring adjuster and the shock housing (noted in removing) as an initial setting3Install the bushings, sleeves, and spacers into each shock end; then place the shock absorber into position on the chassis and spindleInstall both cap screws from the frontTighten the lock nuts to specifications INSPECTING
! NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Inspect the sway bar for any signs of twisting, fatigue, or wear2Inspect the sway bar arms for cracks or damage3Inspect the links, bushings, bushing retainers, and hardware for damage or wearINSTALLING
Key 12345678
Lock Nut Sway Bar Bearing Cap Screw Arm Lock Nut Link Cap Screw
738-752A
1Place the sway bar into position; then install bearing on each end of the sway bar2Slide the sway bar arms onto the sway bar until the holes in the arms align with the notches in the sway barInstall the cap screws and lock nutsTighten securelyFS084C