2007 Arctic Cat Four-Stroke Factory Service Manual, Page 247Get this manual
INSPECTING ! NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
3Install the ski4Align the lower shock eyelet with the mounting hole in the spindle; then secure with the cap screw, optional washers, and lock nutTighten to specifications5Remove the safety stand from beneath the front end
1Inspect the spindle for excessive wear, cracks, bends, or imperfections2Inspect all welds for cracking3Inspect the suspension arm bushings and axle area for wear4Secure the spindle in viseRotate the spindle clockwise and counterclockwiseThe movement should be smooth and freeIf the spindle movement is rough or binding, grease the spindle with good low-temperature greaseRotate the spindleIf the movement remains rough, replace the spindle! NOTE: When greasing the spindle, use enough grease so that it can be seen coming out at both the top and bottom of the spindle
(Jaguar Z1) REMOVING
Spindle