2007 Arctic Cat Four-Stroke Factory Service Manual, Page 241Get this manual
2Secure the steering arms to the drag link with the drag link axles, cap screws (threads coated with blue Loctite #243), and lock nutsTighten to specifications
6Install the exhaust pipe and secure the pipe to resonator, manifold, and the mounting tab with springs; then connect the oxygen sensor and install the hood7Using quality low-temperature grease, grease the steering arms; then verify free movement of the steering components
3Place the steering armsdrag link assembly into position in the chassis; then secure the arms (D) with axles to the chassis with cap screws and lock nuts (C)Tighten the lock nuts to specifications