2007 Arctic Cat Four-Stroke Factory Service Manual, Page 240Get this manual
6Secure the drag link in suitable vise; then remove the cap screws and lock nuts (E) securing the steering arms to the drag linkRemove the arms and account for the axles (F) inside the steering arms! NOTE: With the steering arms removed, note the direction of the steering arms for installing purposes ZJ020A
3Remove the cap screw and lock nut (A) from the drag link end of the spindle tie rod; then remove the cap screw and lock nut (B) securing the leftside spindle tie rod and steering tie rod to the drag link
7If replacing using suitable punch, drive the two bearings out of the drag link
0741-924
! NOTE: To aid in removing the tie rod cap screws from the drag link, position the drag link so the cap screw is aligned with the opening between the skid plate and the suspension mounting bracketZJ162