2007 Arctic Cat Four-Stroke Factory Service Manual, Page 232Get this manual
741-722A
2Lift the rearward end of the console and disconnect the mainhood harness connector; then remove the console3Remove the two screws from the handlebar pad; then remove the self-tapping screw securing the retainer to the riser block assemblyRemove the retainer
6Remove the six exhaust springs securing the exhaust pipe to the manifold and resonator; then remove the spring from the exhaust pipe mounting tabRemove the pipe and secure it out of the way7Remove the two cap screws (A) securing the front end close-off cover to the chassis
4Unlock the cam lever and unthread the lever from the lock rod (A); then remove the lock rod and account for the two bottom cap springs (B)