2007 Arctic Cat Four-Stroke Factory Service Manual, Page 188Get this manual
6Install the throttle cable to the bracket on the throttle body assembly and to the throttle valve cam; then secure the cable with the jam nut! NOTE: Assure that there is proper free-play in the throttle cable when securing the jam nut REMOVINGINSPECTING
1Remove the cap screw securing the strap to the fuel filter bracket
CM114A ZJ103A
! NOTE: To finalize this procedure, it is necessary to install the air silencerProceed to Section Servicing Air Silencer (1100 cc Z1) sub-section and follow steps 3-12 of INSTALLING
2Remove the hose clamps and discard; then slowly remove the fuel hoses from the fuel filterDispose of the excess fuel from the filter properly
Throttle Position Sensor
(660 cc1100 cc Z1)
! NOTE: To check, adjust, or replace the throttle position sensor, refer to the proper sub-section CheckingAdjusting TPS procedure in Section Throttle Position Sensor in this manual