2007 Arctic Cat Four-Stroke Factory Service Manual, Page 184Get this manual
! NOTE: It is advisable to mark the coolant hoses for assembling purposes 6Remove the throttle body from the intake plenum! NOTE: Remove the throttle body ISC bowl before using any type of cleaners to clean the throttle body
2With new throttle body gasket, secure the throttle body to the intake plenum with the four cap screws; then tighten to 2.4 kg-m (17 ft-lb) on the non-turbo models or to 1.3 kg-m (9.5 ftlb) on the turbo models
7Using carburetorthrottle body cleaner, spray throttle valve once and clean the venturi of carbon buildupA fine nylon brush maybe needed to clean carbon deposits
3Connect the coolant lines to the throttle body4Open the throttle valve by hand and install the throttle cable into the valve cam